This module uses a set of transistors with pullup resistors to provide a 2 channel...
The mLink 12-Channel Servo Controller allows you to independently control up to 12 servos per...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...
The mLink Character LCD series consists of serial (I2C/IIC) displays available in two sizes:...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
A USB to 2.1mm DC jack cable with a built-in DC to DC step up converter which will convert the...
Bundle of the following components for use with our Simon Says Youtube video.
Male to...
The Open Smart One R3 is an Arduino Uno (R3) compatible development board. It uses the same...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
A wide range of small ABS plastic enclosures with a flanged lid, ideally suited for mounting...
The ESP-01S is an updated version of the popular ESP-01 module, a compact and powerful Wi-Fi...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
This water level sensor / float switch can be used to sense when a liquid has reached a set...
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
A USB to 2.1mm DC jack cable with a built-in DC to DC step up converter which will convert the...
The Open Smart One R3 is an Arduino Uno (R3) compatible development board. It uses the same...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
A wide range of small ABS plastic enclosures with a flanged lid, ideally suited for mounting...
The ESP-01S is an updated version of the popular ESP-01 module, a compact and powerful Wi-Fi...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
This water level sensor / float switch can be used to sense when a liquid has reached a set...
A 2 pin cable with a female JST XH-2.54 connector at one end and...
LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-link....
The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...
This is our lower cost alternative to the standard R3 Uno, but in this case lower cost doesn't...
The mLink 12-Channel Servo Controller allows you to independently control up to 12 servos per...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
The mLink L9110 motor controller is a serial (I2C) 2 channel DC motor driver that is capable...
The mLink TMP36 module is a tiny serial (I2C/IIC) device that includes a precision TMP36...
The mLink port expander is a serial (I2C/IIC) digital I/O module. It allows you to add 12...
This module uses a set of transistors with pullup resistors to provide a 2 channel...
The mLink 12-Channel Servo Controller allows you to independently control up to 12 servos per...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...
The mLink Character LCD series consists of serial (I2C/IIC) displays available in two sizes:...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
The mLink L9110 motor controller is a serial (I2C) 2 channel DC motor driver that is capable...
The mLink TMP36 module is a tiny serial (I2C/IIC) device that includes a precision TMP36...
Additional add-on for our V2 4x4x4 Cube Kits. This PCB template has been designed to make...
Additional add-on for our V2 4x4x4 Cube Kits. This PCB template has been designed to make...
LED light cubes are a hugely popular and fun project. With this kit (HCKITS0050) you will have...
The Open Smart One R3 is an Arduino Uno (R3) compatible development board. It uses the same...
The Hobby Components breakout shield is a quick and low cost way to add extra pin access to...
This Arduino Uno compatible development board is the ideal option for anyone who just wants to...
This robotic car kit is a complete kit of parts, including electronics, that will allow you to...
The Hobby Components prototyping shield for the Arduino Mega allows you to add your own custom...
The Hobby Components prototyping shield for the Arduino Uno allows you to add your own custom...
PLEASE NOTE THAT THIS KIT IS NOW SHIPPED WITH OUR UNO+ Development Board (See SKU:...
Designed as a means to easily go from your Arduino and breadboard prototype to a more...
A 4 channel relay shield (HCARDU0102) which conveniently and safely allows an Arduino to...
Our Ultimate Sensor Kit has been revamped, and, unlike most in the market, is mercury free! It...
This terminal expansion kit (HCARDU0101) is designed for any version of Nano that conforms to...
This is our lower cost alternative to the standard R3 Uno, but in this case lower cost doesn't...
This kit comprises a clear acrylic platform, which is excellent for keeping your Uno and...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
This adapter board shield (HCARDU0098) is intended to be used with our 3.2" TFT touch screen...
Protect your Arduino Mega with this very low cost but stylish case. Made from clear perspex...
Protect your Arduino Uno with this very low cost but stylish case. Made from clear perspex...
This data logger shield provides an Arduino Uno, Leonardo, or Mega with the ability to log...
This shield (HCARDU0086) is designed to allow you to control a...
Building your own hardware is always fun especially when it's combined with the Arduino...
Our very own version of the popular Arduino Mega development board (HCARDU0092). It hast been...
Love building things out of building blocks as a kid? Love Arduino as an adult? This...
This module uses a set of transistors with pullup resistors to provide a 2 channel...
The mLink 12-Channel Servo Controller allows you to independently control up to 12 servos per...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...
The mLink Character LCD series consists of serial (I2C/IIC) displays available in two sizes:...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
This water level sensor / float switch can be used to sense when a liquid has reached a set...
LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-link....
The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...
The WeMos D1 mini PRO is a miniature wireless 802.11 (Wifi) microcontroller development board....
The Lolin D32 development board is based on the Espressif systems ESP32 low power system on a...
The Wemos triple base (HCWEMO0016) is designed to allow a Wemos shield to be connected to a...
The Wemos dual base (HCWEMO0015) is designed to allow a Wemos shield to be connected to a...
A set of 8 pin headers for WeMos boards and shields. This pack consist of 2 x long pin (10mm)...
The WeMos D1 mini Lite is a miniature wireless 802.11 (Wifi) microcontroller development...
The WeMos Mini D1 OLED shield is a tiny 0.66" 64 x 48 pixel OLED display. Using OLED display...
The WeMos WS2812B RGB Shield is a digital full colour (16777216 colour) RGB LED light source....
The DHT Shield is a digital temperature and humidity sensor utilising the DHT11 sensor....
This prototyping shield is designed for use with the WeMos D1 mini and mini Pro development...
This relay shield is designed to be used with the WeMos mini & mini Pro ESP8266 based...
The WeMos D1 min PRO is a miniature wireless 802.11 (Wifi) microcontroller development board....
The WeMos D1 R2 Uno based ESP8266 a wireless 802.11 (Wifi) microcontroller development board...
This pin header has a standard pitch of 2.54mm. Overall height is 19.5mm with the pins being...
Bundle of TO-92 Transistors comprising 10 each of the following values:
...
Bundle of 70 diodes. The bundle contains 10 each of the following values:
M1...
This bundle of regulators contains a total of 70, 10 each of the following values:
...
Bundle of 0603 SMD LEDs containing 20 each of the following colours:
Red, Yellow,...
These photoresistors are supplied in a bundle containing 10 each of the following values:
...
This set of ceramic capacitors contains 30 different values, 10 each of the following:
...
Set of 180 transistors. Each value is supplied in a pack of 10. Values in the bundle are as...
Low-cost, miniature push-to-make switch with a round black actuator button.
Ideal...
Low-cost, miniature push-to-make switch with a round black actuator button.
Ideal...
This kits contains a selection of useful components and consumables aimed at allowing you to...
Part Number: 09185067813
Description: HART IDC Female connector with strain relief
...
A large resettable emergency stop button. Made from ABS plastic this button has a large 40mm...
